Should The Back Of The Toilet Touch The Wall?

What is better one piece toilet or two?

Performance-wise, there is no difference between the one-piece and two-piece toilets.

They can have the same flushing power and efficiency.

The interior parts are almost identical if they are from the same manufacturer.

They may even have the same features and specifications..

How do I know the rough in size of my toilet?

The rough-in measurement of a toilet refers to the span between the wall behind the toilet and the center of the waste pipe. To measure the rough-in for your toilet, measure from the wall behind the toilet to the middle of the bolt caps (the caps holding your toilet to the floor).

How far can a shower drain be from a vent?

8 feetWhen builders look only at the table without reading the text, they find that a 2-inch-diameter drain can run a maximum distance of 8 feet to the vent.

How far should a toilet be from the back wall?

12 inchesThe Distance To Set The Toilet Flange From The Back Wall. You’ll want to set the center of the water closet flange 12 inches from the finished back wall. Don’t measure from the base molding! Take this measurement from the finished wall.

How do I know if my toilet is a 10 or 12 rough?

If your toilet has four bolts rather than the standard two, you’ll measure to the center of the rear bolts. The standard rough-in measurements are 10, 12 and 14 inches. If your measurement is in between these intervals, round your number down to the nearest standard measurement.

How do I fill the gap between my toilet and floor?

The easiest way to fix the gap between the toilet and the floor is by sealing it with caulk. Make sure to apply an even amount of caulk to cover the gap and hide any imperfections.

How do I choose the right toilet?

Always buy a toilet with the correct rough-in.To determine the size of your toilet rough-in, measure from the wall behind the toilet to the bolt caps of your current toilet. … Most toilets are available in a 12-inch rough-in, which is the standard distance, but a 10- or 14-inch rough-in may be needed in some homes.

Does a shower drain need a vent?

What is a vent and why do you need one? Everyone knows that every toilet, bathtub, sink, shower, etc. will have a drain to carry the water away to sewage treatment, or your septic. … Whether you’re putting in a tub, toilet, sink, or floor drain, they all need a plumbing vent on the drain to make it work properly.

Can toilet be moved closer to wall?

Yes. Yes, the 14 inch Unifit adapter moves the toilet 2 inches close to the wall. It may be possible to adjust further.

How do you fix a toilet that is close to the wall?

Just measure the flange currently. If it is 11″+ off the wall..the 10″ is what you will want to solve your current issue. If you have a 10″ currently, then you’ll need to change the flange on the floor to an offset flange which will move the toilet another 1.5″ away from the wall.

Can you replace a 12 inch rough in toilet with a 10 inch?

A toilet with a 12-inch rough-in will definitely not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space.

Why is there a gap between toilet and wall?

Normally, you want a gap there so condensation doesn’t get trapped against the wall, but it doesn’t have to be huge. On most toilets when they just use different depth tanks, that moves the front of the toilet further into the room.

Can toilets touch walls?

When installing a toilet, there is not a specific distance that the toilet tank should be from the wall. Whether your toilet is one inch from the wall or touching the wall directly, it is really up to your preference.

What do people put on the back of their toilets?

A toilet tray or tank tray or back-of-toilet tray is basically a small tray meant to sit on the back of your toilet tank. The toilet tank itself is like a little shelf.

What do you do with the space behind the toilet?

Filling The Empty Space Behind The ToiletHang towels. … Install hooks for baskets. … Mount an open shelf. … Mount multiple shelves. … Mount baskets. … Mount a storage unit. … Create built-in shelving. … Add a storage tower.More items…•May 30, 2017

How far off the wall should a shower drain be?

Rough-In Dimension TerminologyToiletShower/TubDischarge/Drain Hole from Back Wall12 1/2″14″Discharge/Drain Hole (Vertical)0″0″Fixture (Side to Side Buffer)15″ to 18″ min18″ minFixture (Front Buffer)21″ min18″ min2 more rows•Nov 25, 2020

Where should the shower drain be located?

They may be located in the middle of the floor but are most commonly placed along one wall of the shower. The design and placement of these drains means the entire shower floor slopes gently and evenly toward the drain. No more funnel.