Question: Can You Replace A Round Toilet With An Elongated Toilet?

What’s better elongated or round toilet?

THE PERFECT FIT Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space.

Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″.

Because round bowls are less expensive than elongated bowls, they save a few dollars, too..

Can you mix and match toilet bowls and tanks?

While there are a few models that can interchange tanks and bowls, most are configured to work optimally as a set as indicated in our Product Showcase. In fact, if you do your own mixing and matching, the toilet may not flush at all! Gravity Fed and Pressure Assisted tanks and bowls cannot be mixed.

What toilet paper do plumbers recommend?

Cascades is made with recycled paper. Any toilet paper made with 100% recycled paper will dissolve almost completely. It is the best toilet paper to use. Instead of being made up of long, strong fibres, recycled paper has short fibres that easily break apart into short little pieces.

Does a toilet have to be on an outside wall?

Depending on the run of the joists, there may be real issues with the location of the toilet and yes, inter alia, the outside wall is often the best location. The pipe from the toilet is the biggest single waste pipe, the flushed water makes a lot of noise and an uninsulated pipe can also attract moisture.

Where should the toilet go in a bathroom?

Tip: A standard toilet is 14 to 15 inches high from the finished floor to the top of the bowl (excluding the fold-down seat). Consider a higher measurement of 16 to 18 inches for your wall-mounted toilet if you plan on aging into your golden years.

What’s the smallest space for a toilet?

Experts suggest that for a toilet and basin, you need a space measuring at least 80cm x 140cm. If you’re superstitious, never put a lavatory adjacent to the front door.

How much room do you need for an elongated toilet?

Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.

How easy is it to replace a toilet?

Replacing a toilet is a major project, but it is not as difficult as might be imagined. The hardest tasks usually are selecting a new toilet and removing the old one. Choose a new toilet carefully.

What toilet do plumbers recommend?

It is easy to install and easy to use, that’s why most plumbers recommend Toto Eco Ultramax toilet. American Standard Champion 4 is the best no clog toilet for long lasting use. It requires 1.6 GPF water to remove waste and clean the bowl.

What is the most powerful residential toilet?

The Strongest Flushing ToiletAmerican Standard Cadet Pressure Assisted Toilet – the pressure assist makes this a fast flush toilet and ensures strong performance.TOTO Ultramax Toilet – a siphon flushing action makes this the one with the strongest toilet flush.More items…

Are all toilets interchangeable?

Most toilets are interchangeable with one another, and can be easily replaced as a DIY project or as part of a bathroom remodeling project or as an independent home improvement project. … Toilets also come in a range of seat heights and there are two basic bowl configurations, standard and elongated.

What toilet is best for not clogging?

Here are the best no clog toilet:Toto MS854114ELG#01 Eco Ultramax ADA Elongated Toilet.American Standard 2034.014. … Woodbridge T-0019 Dual Flush Elongated One-piece Toilet.Toto MS604114CEFG#01 Ultramax II best no clog toilet.American Standard 2988101.020 Cadet 3 FloWise Two-Piece Single Flush Toilet.More items…

Why would I want an elongated toilet bowl?

The elongated shape in some brands has less of a crevice around the underside of the bowl, which makes it easier to get a cleaning brush into. The longer shape also makes it simpler to see into the front interior of the bowl, which can help you keep it clean more easily as well.

How do you measure for a replacement toilet?

Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.